Get an instant offer on your damaged car

Our pickup partner will do a quick inspection, and hand you a check.

This service is only available to US clients.

U.S. Steel Output Rises 9.1% to 1.886M Tons: AISI

Steel News  |  2026-11-17 11:47:56

U.S. raw steel production reached 1.886 million net tons during the week ended November 14, 2026, rising 9.1% year over year and 6% from the prior week, according to AISI. Capacity utilization climbed to 81.7%, while Southern mills led production with 832,000 net tons.

U.S. Steel Output Rises 9.1% to 1.886M Tons: AISI
Summary
  • U.S. Weekly Steel Production Records Strong Growth

    American steelmakers produced 1.886 million net tons of raw steel during the week ended November 14, 2026, representing a 9.1% increase from the corresponding week in 2025. Output also advanced 6% from the preceding week's production of 1.779 million net tons.

  • Capacity Utilization and Year-to-Date Output Improve

    The weekly capacity utilization rate climbed to 81.7%, compared with 75.4% a year earlier. Adjusted year-to-date production reached 83.423 million net tons, up 5.9% from 78.748 million net tons during the corresponding period last year. Year-to-date capacity utilization also improved to 79.5%.

  • Southern District Leads Regional Steel Production

    The Southern district remained the largest steel-producing region, accounting for 832,000 net tons during the reporting week. The Great Lakes followed with 529,000 tons, while the Midwest contributed 328,000 tons. The Northeast and Western districts produced 128,000 and 69,000 net tons, respectively.

U.S. Raw Steel Production Jumps 9.1% as Southern Mills Lead Recovery

U.S. raw steel production rose 9.1% year over year and 6% from the previous week to 1.886 million net tons during the week ended November 14, 2026. Southern mills led the rebound, while nationwide capacity utilization climbed to 81.7%, according to the American Iron and Steel Institute (AISI).

By Paul Ploumis | Published: November 17, 2026 | Reporting week ended: November 14, 2026 | Steel News

 

Key Points

  • Weekly production: U.S. mills produced 1.886 million net tons of raw steel, up 9.1% year over year and 6% week over week.
  • Capacity utilization: Rose to 81.7%, compared with 77% the previous week and 75.4% a year earlier.
  • Year-to-date production: Increased 5.9% to 83.423 million net tons through November 14.
  • Regional leader: Southern mills produced 832,000 net tons, the largest contribution among the five U.S. steelmaking districts.

MONTREAL (Scrap Monster): U.S. steelmakers increased raw steel production during the week ended November 14, 2026, recovering from the previous week's sharp decline, according to the latest estimates from the American Iron and Steel Institute (AISI).

Domestic mills produced approximately 1.886 million net tons, an increase of 9.1% from the 1.728 million net tons recorded during the corresponding week in 2025.

Mill capability utilization also strengthened, reaching 81.7%, compared with 75.4% a year earlier.

Weekly Steel Output Rebounds 6% as Mill Utilization Improves

Production increased 6% from the preceding week, when U.S. steelmakers produced 1.779 million net tons at a capability utilization rate of 77%.

The latest increase represents a recovery of approximately 107,000 net tons in weekly output, following the substantial production decline reported for the week ended November 7.

Capacity utilization improved by 4.7 percentage points from the previous week, indicating higher use of available domestic steelmaking capability.

Year-to-Date U.S. Steel Production Rises 5.9%

Adjusted raw steel production for the year through November 14 reached 83.423 million net tons, compared with 78.748 million net tons during the corresponding period in 2025.

The increase of approximately 4.675 million net tons represents year-over-year growth of 5.9%.

Year-to-date capability utilization averaged 79.5%, compared with 76.9% during the same period last year, an improvement of 2.6 percentage points.

Southern District Leads U.S. Steel Production

The Southern district remained the country's largest raw steel-producing region, contributing 832,000 net tons during the reporting week.

The Great Lakes district followed with 529,000 net tons, while the Midwest produced 328,000 net tons.

The Northeast contributed 128,000 net tons, and the Western district accounted for 69,000 net tons.

Together, the five districts produced the national weekly total of 1.886 million net tons.

Data note: AISI weekly raw steel production figures are estimates based on reporting from facilities representing approximately 50% of domestic production capability, supplemented by monthly production data for other facilities. The figures are intended primarily to assess production trends. One U.S. net ton equals 2,000 pounds.

Industry Edge: Southern Mills Drive Recovery, but Output Remains Below October Peak

Southern mills increased production by 81,000 net tons from the previous week, accounting for roughly three-quarters of the national weekly gain. However, despite the 6% rebound, U.S. steel output remained 167,000 net tons below the 2.053 million net tons recorded during the week ended October 31.

Industry Takeaway: Higher mill utilization signals increased steelmaking activity, but does not necessarily translate into proportionate growth in ferrous scrap purchases. Scrap processors should monitor mill operating rates alongside furnace mix, inventories and purchasing schedules.

Also Read

Explore More

Frequently Asked Questions


  • How much raw steel did the United States produce during the week ending November 14, 2026?
  • U.S. steelmakers produced approximately 1.886 million net tons of raw steel during the reporting week, according to the American Iron and Steel Institute. This represented a 9.1% increase from the 1.728 million net tons recorded during the same week in 2025.

  • What was the weekly capacity utilization rate of U.S. steel mills?
  • The capacity utilization rate reached 81.7% during the week ending November 14, 2026, compared with 75.4% during the corresponding week a year earlier. The improvement indicates that domestic steelmakers operated at a higher proportion of their available production capacity.

  • Which U.S. region recorded the highest raw steel production?
  • The Southern district led U.S. raw steel production with 832,000 net tons during the reporting week. The Great Lakes ranked second with 529,000 net tons, followed by the Midwest at 328,000 tons. The Northeast and Western districts contributed 128,000 and 69,000 net tons, respectively.

Are ads getting in your way? Register for Ad-free pages and live data.

Quick Search

Advanced Search