We buy, haul, process, and recycle scrap metal, electronic waste, industrial, commercial, corporate, demolition, municipal, hospital, and construction scrap and much more in the Newark, NJ and surrounding tri-state areas. H&C Metals is a full service scrap metal facility that is family owned and operated with nearly 40 years of experience. We offer some of the best prices in the area and are available to service industries, businesses and the general public. Whether you’re looking to recycle soda cans, get rid of some computer waste, or have thousands of pounds of industrial pipe to scrap, we are the ones to call for all of your recycling needs.Our scrap metal yard, industrial roll-off containers, and different trucking and hauling capabilities can accommodate high volume and sophisticated logistical requirements.We buy ferrous scrap metals such as iron & steel, non-ferrous metals, and other items.We are an approved New Jersey DEP processor and hauler of electronic and computer scrapWe can also handle a number of home appliances including, but not limited to, refrigerators, washers, dryers, hot water tanks, and air conditioners. We also are federally licensed to process, reclaim, and evacuate refrigerants such as Freon.We cannot accept TV’s, wood, glass or any combustible materials. This includes items or materials described as HAZMAT or Radioactive or labeled with those respective symbols. Concrete, dirt, rocks or other solid wastes are also not accepted. If you are in doubt about what we can and cannot handle, don’t be afraid to give us a call and ask.
We Are Scrap Metal Buyers, Recyclers, And Haulers
H&C Metals is a full service scrap metal facility based in Newark NJ serving the tri-state area including New York and Pennsylvania. We are a family owned & operated company, financially strong, with about 40 years experience.We pride ourselves on our communication, follow-up and customer service. Our credibility, reputation, and devotion to customer satisfaction in the industry speaks volumes as evidenced by our longevity and numerous client testimonials.H&C Metals offers resource recovery solutions that allow corporations, contractors, municipalities, industry and the general public to leverage the value of recyclable materials and scrap metal in New Jersey and the tri-state area while contributing to environmental conservation.
H&C Metals’ Story
H&C Metals was started by Frank Colantuono in 1976 in the Ironbound section of Newark. Today, Frank serves as a consultant to his sons Mike and Dan who operate H&C and Balemet, established in 1985. The Colantuono sons carry on the importance their father placed on earning a reputation as an honest, reliable and knowledgeable business partner while balancing time to support various charitable organizations. These characteristics, in tandem with a commitment to exceed customer expectations, have forged long-term, loyal relationships, propelling the company to expand in size and service capabilities. Our customers share the advantages of our financial strength and regional industry name recognition.
Our philosophy is simple: treat our customers, suppliers, consumers, and the public with the respect and professionalism they expect and work hard towards maintaining long term, mutually beneficial relationships. Our sterling reputation and longevity is a direct result of this approach.Whether you deliver to H&C Metals to sell your scrap, or rely on our business-to-business services to solve your recycling challenges, you’ll want to do business with us. Our word, credibility and image are paramount to us and we back it up by fulfilling our commitments timely, ethically & expertly.
Scrap metal recycling is an integral part of the global manufacturing process because the use of scrap metal lowers the environmental impact of manufacturing raw materials, as well as the total cost of producing new materials. The scrap metal industry serves as a “surface mine” – that is, a plentiful source of metal “above ground” to be utilized to produce new products from old, therefore significantly reducing the need for traditional mining. Recycling scrap metal reduces the amount of harmful materials in our waste stream, provides green jobs for Americans, protects the environment, reduces greenhouse gas emissions and uses less energy than making metal from virgin ore.
Electronic products are made from valuable resources and highly engineered materials, including metals, plastics, and glass, all of which require energy to mine and manufacture them. Reusing and recycling consumer electronics conserves our natural resources. Electronics recycling offers the opportunity to transform old technology into a renewable resource. By reclaiming these materials, E-scrap processors mine these valuable commodities for use in the next generation of electronic products. This conservation strategy also protects the environment by keeping scrap materials out of landfills. This is important because many of these products contain potentially hazardous materials like lead and mercury which must be disposed of safely.
We Recycle and Process Your Scrap Metal & Electronic Waste
The US Environmental Protection Agency (EPA) defines recycling as “the separation and collection of materials that otherwise would be considered waste, the processing and remanufacturing of these items into new products, and the use of the recycled products to complete the cycle.”
Scrap Metal Recycling Centers such as H&C Metals and its sister company, Balemet Recycling, function as “surface mines”– the first step in the recycling process for the life cycle of scrap industrial and consumer products, in particular, metal & electronic scrap (E-Scrap). Obsolete, excess, used or damaged products & material such as beverage cans, industrial waste, Steel, Copper, Brass, Aluminum, Auto scrap and CPU Towers are purchased, sorted, prepared & packaged for shipment. Domestic and international consumers of scrap metal, such as smelters, mills & foundries complete the recycling process by melting these materials and manufacturing new products for the global market. Domestic, environmentally responsible E-Scrap recyclers, dismantle post-consumer electronics and the elements contained are reclaimed for manufacturing a variety of new products, including electronics. See the environmental benefits.
Industrial Roll-Off Container Service
H&C Metals provides extensive, industrial roll-off container service to a wide variety of customers and the general public. If you can’t deliver your scrap, this service provides a solution for on-going or temporary storage requirements. H&C Metals strives to deliver or exchange containers, free of charge, within 24-48 hours-notice and potentially the same day. Once we receive your material, it is quickly graded and data such as commodity type, date of service, weight & price are captured in our computer system to generate settlement and tonnage reports upon request.
Roll-off customers include:
| Materials Accepted | |
|---|---|
| Electronics | |
| 1 | Cell Phones |
| 2 | Hard Drives |
| Metal | |
| 3 | Ballasts |
| 4 | Cast Aluminum |
| 5 | Lead |
| 6 | Sheet Metal |
| 7 | Transformers |
| 227 Clifford Street P.O. Box 5150 Newark, New Jersey United States ZIP: 07105 |
| (973) 589-8924 (973) 589-8295 Ken@HCMetals.com |
| 227 Clifford Street P.O. Box 5150 Newark, New Jersey United States ZIP: 07105 |
| (973) 589-8924 NS info@hcmetals.com |
| 91 Malvern Street P.O. Box 5150 Newark, New Jersey United States ZIP: 07105 |
| (973) 589-7778 (973) 589-5879 info@hcmetals.com |
Plastic Keychain Magnet
Keychain Magnets as gift items to promote your Scrap Metal Recycling business!. Letters and numbers can be imprinted. Available Colors: Red, Blue and Green
$2.59
Scrap Metal Test Magnet 10 lb N52 Neodymium Rare Earth
Retrieval and Metal Testing Magnet. Contains The Most Powerful Grade of Neodymium Rare Earth Magnet (N52). Case Material: Aluminum
$9.99