Dust Collector
Equipment | Equipment and system | Miscellaneous Equipment
| Six 12 3/4' diameter x 36' Long |
| @3000 CFM Provides an air to cloth of 2.08:1 |
| Filters are held in place by spring tensioned rod (old style BCP Type) |
| Solenoid is pilot type. 110 Volt |
| Diaphragm is Goyen type. 1-1/2' Port |
| Manual butterfly valve-hopped discharge with hose and (2) worm gear clamps |
| Control box has a disconnect motor starter for the 5 HP motor and transformer for 110 volt pulse board/solenoid |
| Units can be bolted together to make a 6000 CFM and 9000 CFM collector |
| DIMENSIONS |
| 45.4'W x 76'D x 148'H |
| 183' H Including 35' Blower Motor |
| 12' Dust Collector Inlet 14' Exhaust Outlet |
| ATTRIBUTES |
| All components are commercially available on open market. |
| Modules are easily expandable. Bolt on either side (3000-6000-9000 CFM) |
| Direct drive blower |
| 1 1/2' diaphragm blow down valve (Significant cleaning ability) |
| Construction is heavy duty |
| Steel hopper for dust release |
| Simple controls- Dwyer pulse board/ motor starter |
| Stout manual butterfly valve for discharge hopper |
| Easily upgradable to NFPA - Rotary valve/ explosion vents |
| Contact Phone | 9125524095 |
| Fax | N/S |
| Product Price | $7,000 |
| Offer Price | N/S |
| Contact Address |
109 Gallop St St Marys, Georgia 31558 United States |
| Website | https://jacksonville.craigslist.org/hvo/d/kings-bay-dust-collector/7269993894.html |