Scrap Monster
Vulcan
Vulcan
Plastic Recycling November 14, 2019 07:30:06 AM

The Plastics Industry is Changing- Because It Has To

Waste Advantage
ScrapMonster Contributor
Interestingly, target feedstock for processing is the residual plastic aftermechanical recycling has taken place, such as flexible, multi-layer films.

The Plastics Industry is Changing- Because It Has To

SEATTLE (Waste Advantage): That’s the general consensus among some of Europe’s leading plastic industry commentators – the very people working to re-shape the industry. While plastic, in its myriad forms is ingrained in every aspect of our life, ‘plastiphobia’ has entered the vernacular as a condition, and the regulators are cracking down hard on an industry that already faces a number of complex challenges.

But plastipobia shouldn’t be a thing. Plastic should not be demonised, rather treated like the crux of modern living that it actually is. The problem is not with plastic per se, rather recycling of plastic and its inappropriate usage. The plastics industry has become acutely self-aware, and some might even say introspective. Directive targets must be met, new processes researched, developed and launched, and consumer education delivered, and consumer expectations met. And looming over all of this is the spectre of sustainability, and the demonisation of plastics.

Speaking at Circularity for Polymers: The ICIS Recycling Conference in Berlin last week Paul Hodges, Chairman of International E-Chem, said there’s an awful lot of work to do in a very limited time. “It’s very clear there’s a paradigm shift going on in the industry. Companies are waking up to the fact that waste plastics are a really big issue – one that’s not going to go away. Single use plastics are going to be in the firing line for the next few years – and business models simply must change,” he emphasised.

Hodges added that at the core of the shift required is the fact that people don’t know how to recycle plastics, but they do understand why we need to: “We haven’t got the technology available. We haven’t got the collection processes setup. We need to move away from throwing rubbish away at waste sites and focus instead on developing resource centres, based on a distributed network of local chemical recycling plants.”

That move to smaller, local chemical recycling plants – which are more efficient and effective at separating out the different types of plastic to help better achieve the dream of a circular economy – is certainly on the horizon, yet still only a nascent industry. Richard Daley, Managing Director of ReNew ELP, is at the cutting edge of chemical recycling. ReNew ELP are in the final stages of development on the first of four chemical recycling processing lines, with each line processing 20,000 tonnes a year. Their Cat-HTR™ technology utilises what Daley describes as “a unique hydrothermal upgrading process, using supercritical water to break down plastics into reusable, valuable chemicals and oils”.

Interestingly, target feedstock for processing is the residual plastic aftermechanical recycling has taken place, such as flexible, multi-layer films – and ReNew ELP sees itself as complementary to the mechanical recycling process. Echoing Daley, ICIS Senior Editor, Recycling, Mark Victory, said: “Chemical recovery is better in theory – but there are issues with cost and yield. In theory, it’s good, but there are still the same challenges of collection – and it will be five to ten years – an optimistic estimate – before we see large scale chemical recovery.”

Victory identifies another hurdle, in that collection is simply not big enough. He says local authorities – where most responsibility for household waste collection lies – have been underfunded since the global economic downturn more than a decade again, and investment in infrastructure has not kept pace with the growing complexity of packaging as a result. And that domestic issue is further exacerbated by China’s decision to stop taking waste plastics from the rest of the world.

Hodges added that what the industry urgently needs is project teams to work out how to produce more sustainable product and better recycling collection and processing facilities. “We’ve got 18 months to work this out,” he warned, “Because if we don’t do it, brand owners are going to say ‘look we’ve made a commitment to the consumers to have done this by 2025. You’re not moving. So we’re going to have to do something else.’ We have six years to work this out – and we don’t know what to do.”

Hodges concurred on the need for investment, emphatically suggesting the industry needs to provide funding: “The amounts the industry is committing to this sea change is next to nothing – 25 million here, ten million there – come on guys, you know, we’re talking about a hundred billion industry here. You can’t start with pocket money!”

Hodges sees the biggest industry challenge – and perhaps opportunity – as the shift from massive mechanical recycling plants to smaller, local chemical recycling plants. “The new industry business model is small scale and local, whereas for the last 30 to 40 years, all we’ve talked about is massive and global – and this is a complete game changer,” he concluded.

Courtesy: www.wasteadvantage.com

SM Newsletter
Subscribe to SM mailing list and get updates to your inbox
Facebook Twitter Linkedin Instagram