--High purity rate 99.99% for recycling both copper and plastic/rubber
--Designed especially for Low-Grade Wires.
--Can process both Copper and Aluminum wires.
--Maximum throughput 150 lbs of insulated wire per hour.
--Specialized to process automotive, communication, and other scrap wires/ cables under 9/16” in diameter.
--Will process miscellaneous wires that are not economical for a copper wire stripper.
--A compact machine that does not take up an excessive amount of space.
--Environmental-friendly: no dust during operation.
--Easy to operate 1-Person.
1st Feed the material into crusher to pulverize the material into 3-4mm granules.
2nd The material will be carried into air separator by belt conveyor and our belt conveyor is equipped with suspended magnet to separate the iron scraps.
3rd By vibration and high press wind the air separator can separate the copper granules from the plastic.
We also equip two sets vibration screen to re-separate the outlet material to achieve better products. For example:
If the raw material is mixed with jack plugs and the plugs are made of brass and plastic, during the pulverization, the brass will mix with copper circuits. Through the vibration screen we could separate the brass from the pure copper circuits to achieve a higher purity copper.
If the raw material is mixed with thin cables, during the air separation, the small copper circuits will be effected by the high pressure wind and then mix with the outlet plastic.
By using the vibration screen, we could separate the thin copper circuits from the plastic to achieve a better recovery rate and higher purity outlet plastic.
Cable Diameter Range
380V/3 phase/ 50/60Hz(Can be customized)
L:6000mm; W:1900mm; H:2300
|Contact Phone||+86 15838030256|
luokou village, Xicun Town|
Gongyi City, Henan
|Company Name||Kerui Machinery|
|Business Category||Machinery Recycling|
|Address||luokou village, Xicun Town|