Used Rails R50-R65
12,500MT / 25,000 MT X 12 Months, USD 400 CIF
25,000 MT / 50,000MT X 12 Months USD 380 CIF
50,000MT / 90,000MT X 12 Months USD 360 CIF

HMS 1&2 (80/20) IRSI 200-206

5,000 MT / 20,000 MT X 12 Months USD 365 CIF
20,000MT / 60,000MT X 12 months USD 345 CIF

ORIGINS:- UK and EUROPE

PAYMENT TERMS:- SBL/C or BG 100% At Sight,At Liverpool Sea Port, UK.

R50-R65 - IRSI CODES The chemical composition is the standard for R-50 R-65 Tee rails original
weigh 50 pounds per yard or heavier, 6 meters long and over . Material to be suitable for re-rolling
into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split
heads and broken flanges. Continuous welded rail may be included provided no weld is over 9
inches from end of the piece of rail. Free from Fluff, Non ferrous inclusions, excessive rust and
other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used
or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals,
substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and
other impurities not allowed over 0,5 %. The rails are to be neatly bundled and secured with iron
wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW.


ISRI-CODES: (27) Rail, Steel No. 1.Standard section tee rails, original weight 50 pounds per yard
or heavier, 10 feet long and over . Suitable for re-rolling into bars and shapes. Free from bent and
twisted rails, frogs, switch, and guard rails, or rails with split heads and broken flanges. Continuous
welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard
and over, 18 inches long and under (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section,
original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2
Cropped Rail Ends. Standard section, original weight 50 pounds per yard and over, 3 feet long and
under. 29) Rail, Steel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and
switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except
angle bars. Free from concrete, dirt, and foreign material of any kind. The rails can be cut to the
length the buyer wants. ISRI GOST 2787-75 UK

HMS 1&2 (80/20) IRSI200-206 -Steel scrap defined as HMS 1 & 2 in an 80/2 0 mix under IRSI
codes 2 00 through 206. Nonmetal Impurities total 1% (one percent) or less -no radiation, arms,
ammunition, bombs, shells, mines, cartridges, sealed gas cylinders. High carbon steel is not
included in this scrap -we sell that as a separate item. HMS 1 -IRSI CODES HMS 1 -IRSI Code 2

00: Heavy melting steel. Wrought iron and/or steel scrap