Scrap Metal Prices

CME METAL Prices  

SHFE METAL Prices

Scrap Metal Prices & Recycling News
olympus-ims.com
oxford-instruments.com

High Performance Plastics Finish

15 Items
Current filtering criteria
You can remove a filter by clicking on the ×
Commodity : High Performance Plastics  ×
Borotron HD050
Borotron HD050
High Performance Plastics
Borotron HD050 is a high-density polyethylene (HDPE) formulation enhanced with 5% elemental boron that has been used to provide extra shielding against neutron radiation. The combination of boron within a matrix of HDPE, a naturally hydrogen rich material, is used nuclear shielding applications. Hydrogen…
Vespel/Polyimide
Vespel/Polyimide
High Performance Plastics
DuPont Vespel is a high-performance polyimide resin. Vespel performs well with or without lubrication under conditions which would destroy other plastics or severely wear many metals. Vespel parts function over a wide range of temperatures and stresses. Vespel retains its outstanding creep, abrasion…
Ultem / PEI (polyetherimide)
Ultem / PEI (polyetherimide)
High Performance Plastics
Ultem / PEI (polyetherimide) is a high-strength amorphous polymer with excellent heat and flame resistance (carrying a flammability rating of 94-V-0) with little smoke output. It performs continuously to 340° F, making it superior to commodity plastics such as Nylon and Delrin. Ultem is an ideal…
Turcite
Turcite
High Performance Plastics
Turcite is an internally lubricated, acetal-based material (with properties similar to those of Delrin AF) designed for applications with demanding wear and friction requirements. Turcite creates little friction, is heat and chemical resistant, and exhibits excellent wear characteristics. With its low…
Torlon / PAI (Polyamide-imide)
Torlon / PAI (Polyamide-imide)
High Performance Plastics
PAI (polyamide-imide) is a melt-processable plastic that has exceptional physical and chemical properties. It performs well under severe stress conditions at continuous temperatures as high as 500° F. Torlon is an amorphous material with a Tg (glass transition temperature) of 537° F. Outstanding…
Ryton / Techtron / PPS (Polyphenylene Sulfide)
Ryton / Techtron / PPS (polyphenylene sulfide) products offer the broadest resistance to chemicals of any high performance plastic. They have no known solvents below 392°F and are inert to steam, strong bases, fuels and acids. Minimal moisture absorption and a very low coefficient of linear thermal…
Rexolite (Cross Linked Polystyrene)
Rexolite (Cross Linked Polystyrene)
High Performance Plastics
Rexolite is a thermoset, rigid and translucent plastic produced by cross linking polystyrene with divinylbenzene. The material is known for its unusually stable electrical properties into the Giga-hertz range. A cross-linked polystyrene copolymer which is rigid, transparent and colourless with outstanding…
Radel / PPSU (Polyphenylsufone)
Radel / PPSU (Polyphenylsufone)
High Performance Plastics
Radel is a high-performance thermoplastic offering better impact and chemical resistance than polysulfone or polyetherimide (Ultem). Radel has exceptional toughness and outstanding hydrolysis resistance when compared to other thermoplastics as measured by steam autoclaving cycles to failure. Because…
Polysulfone (PSU)
Polysulfone (PSU)
High Performance Plastics
Polysulfone describes a family of thermoplastic polymers. These polymers are known for their toughness and stability at high temperatures. They contain the subunit aryl-SO2-aryl, the defining feature of which is the sulfone group. Polysulfones were introduced in 1965 by Union Carbide. Due to the high…
Polyether ether ketone (PEEK)
Polyether ether ketone (PEEK)
High Performance Plastics
Polyether ether ketone (PEEK) is a colourless organic polymer thermoplastic in the polyaryletherketone (PAEK) family, used in engineering applications. PEEK (polyetheretherketone) is a semicrystalline, high-temperature (up to 500° F) engineering thermoplastic that is excellent for applications where…
Noryl / PPO (Polyphenylene Oxide, modified)
Noryl modified PPO PPO (Polyphenylene Oxide - Styrene)  is an alloy of PPO and styrene with outstanding mechanical, thermal and electrical properties. Low moisture absorption and low thermal expansion make Noryl one of the most dimensionally stable thermoplastics available. Given its excellent…
Mykroy / Mycalex
Mykroy / Mycalex
High Performance Plastics
Mykroy / Mycalex is a glass-bonded mica material. It is the most versatile and efficient electrical and thermal-insulating materials refined to meet the exacting demands of technical markets. Mykroy/Mycalex is the only mineral, fully inorganic material to bridge the performance gap between organic plastics…
Hydlar
Hydlar
High Performance Plastics
Hydlar combines the properties of nylon with the wear resistance of Kevlar Aramid fiber. The composite material is strong, tough and resists wear—up to 20 times greater than nylon alone. The Kevlar also eliminates galling of mating surfaces and provides excellent flexural and tensile strength.…
Hydex / PBT (Polybutylene terephthlate)
Hydex / PBT (Polybutylene terephthlate)
High Performance Plastics
PBT (polybutylene terephthlate) is a polyester that has good chemical and impact resistance, a low coefficient of friction, moderate temperature resistance and outstanding machinability. It does not crack or craze in chlorine nor does it chip or contaminate food products. PBT is approved for direct…
Celazole / PBI (Polybenzimidazole)
Celazole / PBI (Polybenzimidazole)
High Performance Plastics
Celazole PBI is a high performance imidized thermoplastic. Chemically, Celazole PBI is PolyBenzImidazole. Celazole PBI is the highest performing engineering plastic currently available. It offers the highest heat resistance (it does not melt) and mechanical property retention over 400°F (205°C)…